稀土混合物水溶液中囊泡的形成

依据柠檬酸的螯合作用和乙二醇的空间位阻效应，获得了稀土混合物囊泡。并利用ＩＣＰ、ＴＥＭ、ＦＳ等仪器对囊泡的性能进行了研究，最后对囊泡的形成机理进行了讨论。     

薄壁圆管弯曲模设计

对L型薄壁圆管进行了工艺分析，并介绍了弯曲成形的模具结构及工作过程，阐述了划伤，起皱等关键问题的解决方法，并提出了有效的预防措施。     

高性能IGBT模块的设计考虑

本文对ＩＧＢＴ模块中功率芯片（ＩＧＢＴ和续流二极管）的优化设计进行了讨论。通过优化几个重要的工艺参数并改进器件的结构，ＩＧＢＴ不仅有足够的短路容量，而且正向压降与电流下降时间之间可实现最佳折衷。另外，续流二极管的反向恢复特性也有明显改善。通过采用衬底控制技术，ＩＧＢＴ模块的输出特性不受温度的影响，输出电流更稳，输出阻抗更高。本文详细介绍了整个设计考虑。     

履带车辆半主动悬挂系统减振分析

半主动悬挂是车辆悬挂系统的发展方向,其设计思想是采用一个可调阻尼器来代替被动悬挂系统中的阻尼器.磁流变可控阻尼器的出现,使实时阻尼控制成为结构减振的有效方式.本文建立了四自由度车辆系统的振动模型,并应用非线性随机振动理论,在对模型进行简化的基础上,探讨了用FPK法解方程的可能途径.     

振冲法在砂场地地基处理中的应用

通过对典型振冲挤密法施工方法的研究，分析了该方法的加固机理，指出它可提高地基承载力、减少沉降和不均匀沉降，且能达到地基抗地震、抗液化能力的效果。     

Approximate sensitivity analysis for acyclic Markov reliability models

Acyclic Markov chains are frequently used for reliability analysis of nonmaintained mission-critical computer-based systems. Since traditional sensitivity (or importance) analysis using Markov chains can be computationally expensive, an approximate approach is presented which is easy to compute and which performs quite well in test cases. This approach is presented in terms of a Markov chain which is used for solving a dynamic fault-tree, but the approach applies to any acyclic Markov reliability model.     

光纤Bragg光栅监测钢筋混凝土结构应变的实验研究

研究了光纤Bragg光栅在钢筋混凝土结构应变监测中的应用。对其应变、温度灵敏系数进行标定,将其埋设在钢筋混凝土梁内,实现对结构内部应变的监测,并对其工作状态做出评价。实验结果与理论值、传统监测手段监测结果一致。研制出一种钢管封装Bragg光栅温度传感器监测温度,对光纤Bragg光栅的应变与温度的同时测量进行了研究。     

吐哈油田葡北3-12井超长封固段固井技术

葡北3-12注气井位于吐哈盆地葡北构造带中断葡北1号构造．井深为3610m。针对该区块地层承压能力低，易漏失，油气水窜严重，常规固井方法无法满足固井要求的问题，该井采用三段三凝制、常规水泥浆和泡沫水泥浆体系固井，并采用重钻井液顶替技术．降低施工压力。该技术能保证固井候凝过程中井底压力平衡，施工安全。现场应用表明，采用常规水泥浆和泡沫水泥浆固井技术．提高了低压易漏井、长封固井段的固井质量，解决了水泥返高不足的问题；并通过一次常规固井工艺实现了全井封固，简化了施工工艺，节约了成本，经济效益和社会效益十分显著。该井封固优质段累计达2600m，优质率达85％，固井结果良好。     

Numerical characterization of a microscale solid-oxide fuel cell

In this study, a single unit of planar micro-solid-oxide fuel cell (μSOFC) is investigated numerically to evaluate the influences of flow channel design, oxygen composition, and thermal operating conditions on cell performance. Four flow channel designs are examined under the co-flow configuration: serpentine, double serpentine, rod bundle, and oblique rib. For all designs, the contacts areas of interconnect to electrodes are kept consistent to maintain the ohmic losses at the same level. To characterize the mass transport effects, there are three different compositions, 100% O₂, 50% O₂/50% N₂ and air, fed to the cathode inlet. Different thermal conditions, adiabatic and isothermal, are applied to the outer boundary of the μSOFC and the results are compared. The outcomes suggest that both thermal conditions and oxidant composition show remarkable influences on μSOFC performance. Under adiabatic conditions, the rise of cell temperature causes a decrease in reversible voltage, deteriorating the overall cell competence. When oxygen is diluted with nitrogen, local gas diffusion becomes dominant to the cathode reaction. Bulk flow, on the other hand, plays a minor role in cell performance since there is little deviation in the polarization curves for all flow channel designs, even at high current densities. For comparison, the flow visualization technique is employed to observe the transport phenomena in various flow channel designs. The flow patterns are found to resemble the concentration distribution, providing a useful tool to design μSOFCs.     

浅谈电梯选型应注意的问题

电梯选型配置问题是个十分有实际意义的话题。本文结合作者多年来检测检验电梯的经验，浅谈几点选型配置应注意的问题。